Handrail Bracket with Art Deco Rose:

Features

Von Morris Handrail Brackets use an innovative design allowing you to use the base bracket and elbow with any Von Morris Rose. The base attaches to the wall with a 5/16" x 2.0" hanger bolt and three #10 x 2.0" steel wood screws. The rose is then attached to the base plate with a retainer nut. The base allows for 45° of rotation so that roses can be properly aligned, yet prevents full rotation. The elbow fits over the large diameter boss on the base and is secured with a set screw. The saddle is attached to bottom of the rail with two #12 x 1.25" wood screws. Handrail Brackets are supplied standard for flat bottom rail. A radius adapter saddle is available for an additional charge. Screws for the radius adapter saddle are offset equally from the centerline to provide additional stability and to prevent the rail from rocking. Any Von Morris Rose can be used with this Handrail Bracket.

Dimentions

Projection: Wall to centerline of railing: 2.625".

Clearance: 1.625" using 2.0" outside diameter rail.

Standard Saddle: 1.0" wide x 2.0" long - flat.

Fasteners

5/16" x 2.0" hanger bolt and three #12 x 2.0" steel screws.



Von Morris is a manufacturer of extraordinary architectural hardware including specially designed suited trim, knobs, levers, rosettes, turn piece trim, collars, push plates, specialty locks, hinges, and hardware accessories. The suited trim line consists of Art Deco, Bamboo, Beaded, Ribbon and Reed, Moorestown, and Weave styles. Specialty locks for many uses include cremone bolt locks, screen door locks, deadbolts, mortise locks and pocket door locks. Hinge styles include brass full mortise, olive knuckle, paumelle and cabinet hinges. Hardware accessories include handrail brackets, bolts, and door hardware. Products are offered in thirty available finishes.

© Copyright 2017. The Von Morris name and logo are registered trademarks of Eric Morris & Company. All Rights Reserved.